Shanghai Change Enterprise Management Consulting Co., Ltd.
Tel:021-64938244,64934915
Fax:021-64934398
Unified national service hotline:400-888-2590
Mobile:18019093972
Mail:690608054@qq.com
URL:www.shchange.com.cn
Shanghai Change Enterprise Management Consulting Co., Ltd.
Tel:021-64938244,64934915
Fax:021-64934398
Unified national service hotline:400-888-2590
Mobile:18019093972
Mail:690608054@qq.com
URL:www.shchange.com.cn
The CARB certification regulations are implemented in two phases (Phase 1 and Phase 2). Phase 1 (P1) of di starts on January 1, 2009. It requires the climate chamber method ASTM E 1333 or ASTM D 6007 to test the formaldehyde emission of panels. Hard plywood (HWPW) must be less than 0.08ppm, particle board (PB) must be less than 0.18ppm, and medium density fiberboard (MDF) must be less than 0.21ppm. Starting in 2010, the requirements of the second phase (P2) of the regulations will be implemented successively. The regulations not only impose requirements on factories that produce panels, but also have strict requirements on furniture factories, importers, traders, and retailers. Among them, the specific requirements for plate manufacturers are as follows
The formaldehyde emission of the board must meet the requirements of the standard
Third-party certification must be compulsory (factory should establish a quality management system and quality control laboratory as required)
A qualified label must be affixed to the product
From the above we can see that in addition to the requirement that product tests must be qualified, the regulations also require factories to establish quality control laboratories and quality management systems in strict accordance with the regulations to supervise their products and ensure that every batch of panels produced by the factory is It is a qualified product. This is the major difference between CARB regulations and other regulations, and it is also a point that is more difficult to obtain CARB certification.
Service Hotline:
400-888-2590